Explosion-proof
IO-link
GSM - Wifi
NFC sensors
ZHM 01/2 KL - Gear Flow Meters with Ball Bearing for lubricating and non abrasive fluids - 0.02 up to 3.0 l/min.
ZHM KL gear flow meters (ball bearing design) are flow meters used primarily for lubricants. They are also suitable for higher to low viscosity media. The ball bearing allows a very low starting torque of the measuring element. Thus, even the lowest flow rates at low viscosity can be accurately measured.
- Uitstekend beoordeeld: 96.42% heeft een goede tot zeer goede ervaring
- Persoonlijke klantenservice en advies
- Extra korting bij grote aantallen mogelijk: Neem contact op
Beschrijving
ZHM KL gear flow meters (ball bearing design) are flow meters used primarily for lubricants. They are also suitable for higher to low viscosity media. The ball bearing allows a very low starting torque of the measuring element. Thus, even the lowest flow rates at low viscosity can be accurately measured.
Measuring Ranges 0.02 up to 3.0 l/min
Measuring Accuracy up to ±0.1 %
Repeatability ±0.05 % (under the same conditions)
Linearity ±0.5 % of actual flow (viscosity ≥ 30 mm²/s)
Materials
- Housing: as per DIN 1.4305 [AISI 303], 1.4404 [AISI 316L]
- Gears: shaft per DIN 1.4122, 1.4501 [AISI F55].
- Bearing: Stainless Steel Ball bearing (ZHM 01/2-06/1), Chrome roller bearing (ZHM 06-07)
- Seals: FKM, PTFE (others on request)
Pressure up to 420 bar [6,000 psi]
Medium Temperature -40 °C up to +180 °C [-40 °F up to +356 °F] (others on request)
